Hydrokit for ECOi. Water at 45 °C

This Hydrokit module provides hot water using the wasted heat that is recovered from the indoor, standard air conditioning unit whilst in cooling mode.
The total system performs at a high energy efficiency using this heat recovering operation, also supplying an advantage for environmental-friendly assessment schemes such as BREEAM (UK). Connect the Hydrokit to your VRF system to work together with other indoor units.


Connect the Hydrokit to your VRF system, together with other indoor units.

Technical focus
  • Only with 3-Pipe ECOi MF2 6N Series outdoor units
  • Remote controller CZ‑RTC5B common use with DX Coil indoor units ECOi and PACi

Hydrokit control function / CZ‑RTC5B
  • CZ‑RTC5B is updated version from CZ-RTC3. It can be used for hydrokit and also normal indoor unit. CZ‑RTC5B checks the type of connected unit and switch hydrokit or air conditioner style of display automatically
  • Operating  mode on hydrokit style to be set at initial setting of the system from following modes: tank mode or air conditioning mode
Basic principle & advantage
Hydrokit module provides hot water by using waste heat that is recovered from standard air-conditioning indoor unit in cooling mode.
Total system performs high energy efficiency by this heat recovering operation, and it gives an advantage for sustainability related assessment methods, such as BREEAM in UK.

Overview: hydromodule in VRF system
  • Multiple hydromodule connection in same circuit is available
  • Each module can be set different operation mode either hot water supply mode or space heating mode (both operation modes are not able to set at 1 hydromodule)
  • 3-Pipe control solenoid valve kit is necessary for each indoor unit and hydromodule
1. 3-Pipe ECOi MF2 6N Series outdoor unit. 2. Heat recovery from standard indoor units. 3. Cooling. 4. Cooling. 5. Indoor units. 6. Hot water supply. 7. Max 65 °C (with E-heater). Water heating. 8. Max 45 °C Space heating. 9. Hydromodule

* Cold water also available.