İç Bağlanabilirlik KNX / EnOcean / Modbus projelerinize entegrasyon sağlayan büyük esneklik tüm çalışma parametrelerinin iki yönlü olarak izlenmesini ve kontrol edilmesini sağlar

Arayüz, Panasonic için özel olarak tasarlanmıştır ve tüm Aquarea serilerinin KNX, EnOcean ve Modbus kurulumlarından tam olarak izlenmesini, kontrol edilmesini ve tam işlevleriyle çalıştırılmasını sağlar. Bu bağlanabilirlik çözümü üçüncü taraf bir şirket tarafından yapılmaktadır; daha fazla bilgi için lütfen Panasonic ile iletişim kurun.
Empty
Interface to connect Etherea to KNX
References: PA-AC-KNX-1i
This new Etherea-KNX interface allows full bi-directional monitoring and control of all the functioning parameters of Etherea control from KNX installations. Small dimensions.
  • Quick installation and possibility of hidden installation.
  • External power not required.
  • Direct connection to the AC indoor unit (split unit or Multi split unit)
  • Fully KNX compatible. Control and monitoring, from sensors or gateways, of the internal variables of the indoor unit and error codes and indication.
  • Use the air conditioner ambient temperature or the one measured by a KNX temperature sensor or Thermostat.
  • AC unit can be controlled simultaneously by the remote control of the AC unit and by KNX devices.
  • Advanced control functions: use it as a room controller.
  • 4 binary inputs. They work as standard KNX binary inputs as well as being used to control the AC directly.
Interface to connect Etherea to Modbus
References: PAW-AC-MBS-1
This new Etherea-Modbus interface allows full bi-directional monitoring and control of all the functioning parameters of Etherea control from Modbus installations. Small dimensions.
  • Quick installation and possibility of hidden installation.
  • External power not required.
  • Direct connection to the AC indoor unit (split unit or Multi split unit)
  • Fully Modbus compatible. Control and monitoring, from sensors or gateways, of the internal variables of the indoor unit and error codes and indication.
  • Use the air conditioner ambient temperature or the one measured by a Modbus temperature sensor or Thermostat.
  • AC unit can be controlled simultaneously by the remote control of the AC unit and by Modbus devices.
  • Advanced control functions: use it as a room controller.
  • 4 binary inputs. They work as standard Modbus binary inputs as well as being used to control the AC directly.
Empty
1. 4 x binary inputs
2. Interface
Empty
Empty
1. 4 adet ikili giriş 2. Arayüz 3. EnOcean Anahtarı 4. EnOcean RC 5. Anahtar kartı 6. Hareket sensörü
BACnet Interface
Reference: PAW-AC-BAC-1
This interface allows a complete and natural integration of Panasonic air conditioners into either BACnet IP or MS/TP networks.
  • Quick installation and possibility of hidden installation
  • External power not required
  • Direct connection to the AC indoor unit
  • Total Control and Supervision. Real states of the AC unit’s internal variables
  • Allows using simultaneously the IR and wired remote controls and BACnet.
Reference: PAW-AC-DIO
Dry contact ON/OFF Interface. Panasonic has developed for hotels applications a dry contact PCB which works with Etherea, RE, UE and YE indoor units in order to control simply the unit centrally.
  • ON/OFF signal by 3rd party BMS
  • PCB connected to CN-RMT port on Indoor Unit PCB