Big PACi 8-10HP
Large capacity PACi Elite
Trusted power and high efficiency

Panasonic series PE2 Big PACi
Better partial load (10% ~ 100%) / More flexible piping / 0-10V control demand
Energy saving functions / AHU connection kit / From 1 to 4 indoor units

Inverter +

Bluefin anti-rust coating

R22 piping renewal

5 Years Warranty
The 8-10HP from Panasonic is ideally suited for large retail applications and other large areas not needing the higher capacities of VRF systems. Can connect from 1 duct to 4 indoor units (duct, cassette, wall or ceiling units).

Panasonic breaks new ground in offering high performance and power in a small space. The 8-10HP from Panasonic is ideally suited for large retail applications and other large areas not needing the higher capacities of VRF systems. The lightweight and compact design enables easier installation in any commercial space. The twin fan system saves valuable floor space compared to traditional 8-10HP systems which are larger and therefore require a bigger footprint.
All New “A” Functions
· Control demand 0-10V via CZ-CAPBC2
· Schedule peak cut
· Advanced Energy Saving Functionalities available in Elite series
· Compact design: Good size to install balcony
· Suitable for Mid, Small Project: Piping design is suitable for Light Commercial and Residential project up to
All New “A” Functions
· Control demand 0-10V via CZ-CAPBC2
· Schedule peak cut
· Advanced Energy Saving Functionalities available in Elite series
· Compact design: Good size to install balcony
· Suitable for Mid, Small Project: Piping design is suitable for Light Commercial and Residential project up to
Enlarged heat exchanger surface area with double surface
The new heat exchanger features a double-surface construction. Compared to the divided dual-surface construction in current models, there is no division of space and the area for heat exchange is larger. Also, its highly. efficient piping pattern increases heat exchange performance by 5%.
Bluefin
Panasonic has found a way to expand the life of our condensers, using a layer of our proprietary anti-rust coating. This special coating protects the condenser from sea air, wind, dust and other corrosive factors corrosive factors ensuring you can enjoy many years of reliable comfort with energy savings over the long run.
The new heat exchanger features a double-surface construction. Compared to the divided dual-surface construction in current models, there is no division of space and the area for heat exchange is larger. Also, its highly. efficient piping pattern increases heat exchange performance by 5%.
Bluefin
Panasonic has found a way to expand the life of our condensers, using a layer of our proprietary anti-rust coating. This special coating protects the condenser from sea air, wind, dust and other corrosive factors corrosive factors ensuring you can enjoy many years of reliable comfort with energy savings over the long run.
PE2 vs. PE1 series
PE2
Fan air-flow rate (m3/min): 150
Heat exchanger face area (m2): 4,03
Chassis dimensions (mm): 1.500 x 980 x 370
PE1
Fan air-flow rate (m3/min): 118
Heat exchanger face area (m2): 3,73
Chassis dimensions (mm): 1.526 x 940 x 340
IMPROVEMENT
Fan air-flow rate (m3/min)
27%
Heat exchanger face area (m2)
8%
Chassis dimensions (mm)
12%
