New Aquarea T-CAP for extremely low temperatures. 100% capacity at -15°C

Install A Class pump: Industry top class energy-saving!
The whole T-CAP line-up can replace old gas or oil boilers, and in a new application with under floor heating, low temperature radiators or even fan-coil heaters. This range can also be connected to a solar kit in order to increase efficiency and minimize the impact on the ecosystem. Finally, it is possible to connect a thermostat for even better heating or cooling control and management.
  • T-CAP stands for Total Capacity. This line-up is able to maintain the same nominal capacity even at -15°C without the help of an electrical booster heater.
  • High heating capacity even at low ambient temperatures.
  • Maintains capacity of 16 kW until -15°C outdoor temperature. Adding many new functions: Auto mode, Holiday mode, power consumption display.
Empty
The New T-CAP range has extended with the addition of the 16kW pump
The new 16kW maintains full capacity of 16kW even at outdoor temperatures down to -15°C.
The 16kW fits perfectly to retrofit houses, as well as to commercial applications to heat and cool the applications and also to provide sanitary hot water.
Enhance larger capacity (16kW)
More Energy saving with A Class pump.
Adding new functions
Auto mode, Holiday mode, Displays power consumption, New de-ice control, Concrete Dry mode, Lock cooling mode and Pump speed control.
Applications
For retrofit houses
Replace easily expensive gas or oil boilers for high efficient 16kW T-CAP or manage bivalent installations (heat pump and existing gas or oil boiler) with the Heat Pump Manager.
Further information on: www.panasonicproclub.com
For commercial applications
Wide range of capacities now covered - from 9kW to 45kW with the Heat Pump Manager. Also you are able to connect up to three heat pumps on cascade with the Heat Pump Manager.
For heating and cooling mode
The 16kW model is able to heat the water at 55°C and is highly efficient even when the temperature is as low as -20°C. Cooling operation can be activated on the remote control to cool water up to +5°C.
For heating and sanitary hot water
Efficient domestic hot water tanks allow large storage for high consumption of hot water (for example Jacuzzi or bathtub). All our tanks have an anti-legionella protection with a backup heater of 3 kW.
Empty
Best efficiency compared to other heating Efficiency systems
Panasonic heat pumps have a maximum COP of 4,85 at + 7 °C which makes them much more efficient than fossil fuel fired boilers, gas boilers and electrical heaters.

1. Water 35 ºC
2. Water 55 ºC
3. Fuel fired boiler
4. Gas boiler
5. Panasonic T-CAP 9 kW at +7°C
6. Panasonic T-CAP 9 kW at -7°C
Empty
A Class pump. More Energy saving
Aquarea T-CAP maintains the nominal capacity until -15°C
The T-CAP line-up is able to maintain the same nominal capacity even at -15°C without the help of an electrical booster heater. T-CAP is also able to provide extremely high efficiencies, whatever the outside or the water temperature. Panasonic has now extended the range with the new three phase 16kW.

1. Heating capacity
2. Outdoor temperature (heating water at 35°C)
3. T-CAP 16kW
4. High connectivity 16kW
Empty
· Backup heater capacity can be selected (3/6/9kW)
· Cooling mode activation possible by software*
* This activation can only be done by service partner or installer

A. Capacity in kW
B. Capacity is stable even at -15°C, no need to oversize the heat pump
C. High flexibility with Panasonic Inverter compressors. High performance even at part load
D. Capacity needed to heat the house
E. Outdoor temperature
F. Panasonic heat pump does not need heater as the capacity is maintained
G. Capacity of other heat pumps need to be higher than the Panasonic heat pumps
H. Bad performance to big capacity
I. Other Heat pumps need electrical heater to cover the demand of the house
J. Other heat pump