10.0 kW. PACi Standard adaptive ducted unit - PF3 - R32

KIT-100PF3Z25 (S-1014PF3E + U-100PZ2E5)

Newly designed adaptive ducted unit - PF3 for R32 PACi

2 installation possibilities (horizontal / vertical) with high external static pressure 150Pa allows flexible installation.

  • 2 installation possibilities (horizontal / vertical)
  • Maximum external static pressure: 150Pa
  • Selectable inlet air position (rear / bottom entry)
  • Improved drain pan suitable for both horizontal / vertical installation
  • Drain pump included
  • nanoe™ X (Generator Mark 2= 9,6 trillion OH radicals / sec) as standard and effective even with installations up to 10m long duct*
  • New wired remote control CZ-RTC6BL allows easy system setting via Bluetooth®

    * Panasonic internal survey.

Bringing nature’s balance indoors

Specifications

See all
PACi Standard adaptive ducted unit - PF3 - R32 Single Phase
10.0 kW
Kit KIT-100PF3Z25
Remote controller CZ-RTC6
Cooling capacity (Nominal) kW 9,5
Cooling capacity (Min) kW 3,1
Cooling capacity (Max) kW 11,4
EER (Nominal) (1) W/W 3,57
EER (Min) (1) W/W 6,00
EER (Max) (1) W/W 2,36
SEER/ηsc (2) % 6,6 A++
Pdesign (cooling) kW 9,5
Input power cooling (Nominal) kW 2,66
Input power cooling (Min) kW 0,50
Input power cooling (Max) kW 4,84
Annual energy consumption cooling (3) kWh/a 502
Heating capacity (Nominal) kW 9,5
Heating capacity (Min) kW 3,0
Heating capacity (Max) kW 13,5
COP (Nominal) (1) W/W 4,09
COP (Min) (1) W/W 6,00
COP (Max) (1) W/W 3,00
SCOP/ηsc (2) % 3,9 A
Pdesign at -10°C kW 7,8
Input power heating (Nominal) kW 2,32
Input power heating (Min) kW 0,50
Input power heating (Max) kW 4,50
Annual energy consumption heating (3) kWh/a 2795
Indoor unit S-1014PF3E
External static pressure (Nominal) (4) Pa 40
External static pressure (Min) (4) Pa 10
External static pressure (Max) (4) Pa 150
Moisture removal volume L/h 3,2
Indoor air flow (Hi) m³/min 32,0
Indoor air flow (Med) m³/min 26,0
Indoor air flow (Lo) m³/min 21,0
Indoor sound pressure (Hi) (5) dB(A) 33
Indoor sound pressure (Med) (5) dB(A) 29
Indoor sound pressure (Lo) (5) dB(A) 25
Indoor sound power (Hi) dB(A) 56
Indoor sound power (Med) dB(A) 52
Indoor sound power (Lo) dB(A) 48
Indoor dimension (Height) mm 250
Indoor dimension (Width) mm 1400
Indoor dimension (Depth) mm 730
Indoor net weight kg 39
nanoe X Generator Mark 2
Outdoor unit U-100PZ2E5
Outdoor power source V 220 - 230 - 240
Current in cooling (1p 220V / 3p 380) A 12,10
Current in cooling (1p 230V / 3p 400) A 11,60
Current in cooling (1p 240V / 3p 415) A 11,10
Current in heating (1p 220V / 3p 380) A 10,50
Current in heating (1p 230V / 3p 400) A 10,00
Current in heating (1p 240V / 3p 415) A 9,60
Outdoor air flow (Cool) m³/min 76
Outdoor air flow (Heat) m³/min 70
Outdoor sound pressure (Cool -Hi) dB(A) 52
Outdoor sound pressure (Heat -Hi) dB(A) 52
Outdoor sound power (Cool -Hi) dB(A) 70
Outdoor sound power (Heat -Hi) dB(A) 70
Outdoor dimension (Height) mm 996
Outdoor dimension (Width) mm 980
Outdoor dimension (Depth) mm 370
Outdoor net weight kg 90
Pipe diameter (Liquid) Inch (mm) 3/8 (9,52)
Pipe diameter (Gas) Inch (mm) 5/8 (15,88)
Pipe length range m 5 ~ 50
Elevation difference (in/out) (6) m 30
Pipe length for additional gas m 30
Additional gas amount g/m 45
Refrigerant (R32) / CO2 Eq. kg / T 2,60 / 1,755
Operating range (Cool - Min) °C -10
Operating range (Cool - Max) °C +43
Operating range (Heat - Min) °C -15
Operating range (Heat - Max) °C +24
(1) EER and COP calculation is based in accordance to EN14511.
(2) Energy Label Scale from A+++ to D. For models below 12kW, the SEER and SCOP is calculated based on values of EU/626/2011. For models above 12kW, the ηsc / ηsh values is calculated based on EN 14825.
(3) The annual energy consumption is calculated in accordance to EU/626/2011.
(4) Medium External static pressure setting from factory.
(5) The sound pressure of the units shows the value measured of the position 1,5m below the unit. The sound pressure is measured in accordance with Eurovent 6/C/006-97 specification.
(6) When installing the outdoor unit at a higher position than the indoor unit.
* Recommended fuse for the indoor 3A.
** Above values are in the case of standard installation(horizontal installation in the celling, rear side air intake) and nanoe™ X OFF.

Complementary products

What's happening