Séria iCOOL SE - LT
Previous capacity
Next capacity
1.20kW
OCU-KRE012L05
Séria iCOOL SE. Jednoduché technické riešenie pre LT aplikácie
Od 1,2 do 3,0 kW.
Jednoduchá inštalácia so zjednodušeným procesom uvedenia do prevádzky. Invertorová technológia ešte nikdy nebola taká jednoduchá.
Ušetrite čas a prevádzkové náklady s našimi energeticky úspornými jednotkami založenými na invertorových kompresoroch.
- Podobné investičné náklady a výrazná úspora energie v porovnaní s technológiou on-off
- Plne invertorová technológia BLDC
- Špecializovaný PLC regulátor
- Nízka hlučnosť prevádzky
- Vhodné pre aplikácie s viacerými výparníkmi (modely MT)
- Navrhnuté a vyrobené v Európe
Špecifikácie
Pozri všetky
| Séria iCOOL SE - LT | |||
|---|---|---|---|
| 1.20 kW | |||
| Model | OCU-KRE012L05 | ||
| Compressors | Jeden kompresor | ||
| Compatible refrigerants | R448A, R449A | ||
| PED | CAT | I | |
| Application and nominal cooling capacity | MT/LT (kW) | LT (1,2) | |
| LT (R449A/R448A) - Cooling capacity at | . | ||
| ET -35°C, AT 32°C (Min - Max) | kW | 0,3 - 1,0 | |
| ET -35°C, AT 38°C (Min - Max) | kW | 0,3 - 0,9 | |
| ET -35°C, AT 43°C (Min - Max) | kW | 0,2 - 0,8 | |
| ET -30°C, AT 32°C (Min - Max) | kW | 0,4 - 1,2 | |
| ET -30°C, AT 38°C (Min - Max) | kW | 0,3 - 1,1 | |
| ET -30°C, AT 43°C (Min - Max) | kW | 0,3 - 1,0 | |
| ET -25°C, AT 32°C (Min - Max) | kW | 0,5 - 1,5 | |
| ET -25°C, AT 38°C (Min - Max) | kW | 0,4 - 1,4 | |
| ET -25°C, AT 43°C (Min - Max) | kW | 0,4 - 1,3 | |
| SEPR freezing at ET -35°C AT 32°C (R448A) | — | ||
| Annual electricity consumption at ET -35°C AT 32°C (R448A) | kWh/a | — | |
| COP at ET -35°C, AT 32°C (R448A) | 0,95 | ||
| Nominal operating current at ET -10°C MT / -30°C LT AT 32°C and 230 - 400V 50Hz | A | 5,5 | |
| Maximum operating current (in the most loaded phase at 230 - 400V 50Hz) | A | 7,2 | |
| Maximum power consumption | kW | 1,4 | |
| Dimension (Width) | mm | 1.000 | |
| Dimension (Height) | mm | 605 | |
| Dimension (Depth) | mm | 450 | |
| Net weight | kg | 70 | |
| Sound level at 10m | dB(A) | 42,5 | |
| Connections (Suction) | Inch (mm) | 1/2 | |
| Connections (Liquid) | Inch (mm) | 3/8 | |
| Liquid receiver | dm³ | 3,9 | |
| Length of connection piping | m | 20 | |
| Maximum height distance (Evaporator above) | m | 7 | |
| Maximum height distance (Evaporator below) | m | 7 | |
| Which pipes needs to be insulated (Suction / liquid / both) | Suction | ||
| Recommended insulation thickness | mm | 19 | |
| Maximum quantity of evaporators connected | Qty. | 3 | |
| Evaporation temperature (Min) | °C | -35 | |
| Evaporation temperature (Max) | °C | -15 | |
| Ambient temperature (Min) | °C | -20 | |
| Ambient temperature (Max) | °C | 43 | |
| Condenser | . | ||
| Fans x diameter | mm | 1x450 | |
| Air flow (Nominal) | m³/h | 3.600 | |
| Fan power supply | V / ph / Hz | 220 - 240 / 1 / 50 | |
| Fan power consumption | W | 170 | |
| Nominal fan amperage | A | 1,4 | |
| Compressor - additional data | . | ||
| Compressor model | C-6RVN63L0B | ||
| Volumetric flow | m³/h | 0,6 - 4,1 | |
| Rotation range | rps | 30 - 90 | |
| Current (Full load amperage) | A | 3,6 | |
| Current (Peak current limit / Locked rotor amperage) | A | 15 / — | |
| Oil type | FV68S | ||
| Oil compressor charge | dm³ | 0,6 | |
| Crankcase heater power consumption | W | 35 | |
| CU power supply | . | ||
| Voltage | V / ph / Hz | 220 - 240 / 1 / 50 | |
| Recommended minimum cable cross-section | mm² | 3x2,5 | |
| Recommended minimum protection | C16 | ||