Séria iCOOL OCU - MT
12.00kW
OCU-KSC120M08
Séria iCOOL OCU pre aplikácie MT
Možnosť osloviť širšie publikum a pokryť trh s kondenzačnými jednotkami (CDU), ktorý dnes CO₂ ešte nepokrýva.
- Kompletný kapacitný rad kompaktných jednotiek CDU pre aplikácie s viacerými odparovačmi
- Výrazná úspora energie v porovnaní s ON/OFF
- Jednotky s nízkou hlučnosťou so špeciálnymi tichými funkciami: Invertorový kompresor, EC ventilátor a 6-vrstvová zvukotesná izolácia priestoru kompresora
- Možnosti prispôsobenia - plne testované a namontované vo výrobe
Špecifikácie
Pozri všetky
| Séria iCOOL OCU - MT | |||
|---|---|---|---|
| 12.00 kW | |||
| Model | OCU-KSC120M08 | ||
| Compressors | Jeden kompresor | ||
| Compatible refrigerants | R448A, R449A, R134a, R513A | ||
| PED | CAT | II | |
| Application and nominal cooling capacity | MT/LT (kW) | MT (12,0) | |
| MT (R449A/R448A) - Cooling capacity at | . | ||
| ET -15°C, AT 32°C (Min - Max) | kW | 2,4 - 9,8 | |
| ET -15°C, AT 38°C (Min - Max) | kW | 2,1 - 9,0 | |
| ET -15°C, AT 43°C (Min - Max) | kW | 2,0 - 8,5 | |
| ET -10°C, AT 32°C (Min - Max) | kW | 3,0 - 11,9 | |
| ET -10°C, AT 38°C (Min - Max) | kW | 2,7 - 10,8 | |
| ET -10°C, AT 43°C (Min - Max) | kW | 2,5 - 10,3 | |
| ET -5°C, AT 32°C (Min - Max) | kW | 3,7 - 14,3 | |
| ET -5°C, AT 38°C (Min - Max) | kW | 3,4 - 13,1 | |
| ET -5°C, AT 43°C (Min - Max) | kW | 3,1 - 12,5 | |
| MT (R134a/R513A) - Cooling capacity at | . | ||
| ET -15°C; AT 32°C (Min - Max) | kW | 1,6 - 5,5 | |
| ET -15°C; AT 38°C (Min - Max) | kW | 1,5 - 5,1 | |
| ET -15°C; AT 43°C (Min - Max) | kW | 1,4 - 4,8 | |
| ET -10°C; AT 32°C (Min - Max) | kW | 2,1 - 6,8 | |
| ET -10°C; AT 38°C (Min - Max) | kW | 1,9 - 6,3 | |
| ET -10°C; AT 43°C (Min - Max) | kW | 1,8 - 6,0 | |
| ET -5°C; AT 32°C (Min - Max) | kW | 2,6 - 8,3 | |
| ET -5°C; AT 38°C (Min - Max) | kW | 2,4 - 7,8 | |
| ET -5°C; AT 43°C (Min - Max) | kW | 2,2 - 7,3 | |
| SEPR cooling at ET -10°C AT 32°C | 3,48 | ||
| Annual electricity consumption at ET -10°C AT 32°C | kWh/a | 20.141 | |
| Nominal operating current at ET -10°C MT / -30°C LT AT 32°C and 230 - 400V 50Hz | A | 14,8 | |
| Maximum operating current (in the most loaded phase at 230 - 400V 50Hz) | A | 20,5 | |
| Maximum power consumption | kW | 9,3 | |
| Dimension (Width) | mm | 1.420 | |
| Dimension (Height) | mm | 963 | |
| Dimension (Depth) | mm | 439 | |
| Net weight | kg | 175 | |
| Sound level at 10m | dB(A) | 40,0 | |
| Oil charge | dm³ | 2,0 + 0,4 | |
| Connections (Suction) | Inch (mm) | 7/8 | |
| Connections (Liquid) | Inch (mm) | 1/2 | |
| Liquid receiver | dm³ | 10 | |
| Length of connection piping | m | 40 | |
| Maximum height distance (Evaporator above) | m | 12 | |
| Maximum height distance (Evaporator below) | m | 12 | |
| Which pipes needs to be insulated (Suction / liquid / both) | Suction | ||
| Recommended insulation thickness | mm | 13 | |
| Maximum quantity of evaporators connected | Qty. | 7 | |
| Evaporation temperature (Min) | °C | -15 | |
| Evaporation temperature (Max) | °C | 10 | |
| Ambient temperature (Min) | °C | -20 | |
| Ambient temperature (Max) | °C | 43 | |
| Condenser | . | ||
| Fans x diameter | mm | 1x710 | |
| Air flow (Nominal) | m³/h | 6.920 | |
| Fan static pressure | Pa | N/A | |
| Fan power supply | V / ph / Hz | 200 - 277 / 1 / 50 | |
| Fan power consumption | W | 280 | |
| Nominal fan amperage | A | 1,2 | |
| Compressor - additional data | . | ||
| Compressor model | C-SBS180H00B | ||
| Volumetric flow | m³/h | 5,8 - 19,2 | |
| Rotation range | rps | 32 - 100 | |
| Current (Full load amperage) | A | 15,8 | |
| Current (Peak current limit / Locked rotor amperage) | A | 40 / — | |
| Oil type | FV68S (PVE) | ||
| Crankcase heater power consumption | W | 70 | |
| CU power supply | . | ||
| Voltage | V / ph / Hz | 3x400 / 50 PE+N (TN-S) | |
| Recommended minimum cable cross-section | mm² | 5x4,0 | |
| Recommended minimum protection | C25 | ||