Séria iCOOL WCU - LT
3.0kW
WCU-KRC035L08
Séria iCOOL WCU pre aplikácie LT
Variant iCOOL na splnenie náročných požiadaviek na prostredie inštalácie.
Vysoko výkonná invertorová kondenzačná jednotka chladená vodou/glykolom pre komerčné inštalácie. Určená pre aplikácie LT. Vybavená hermetickým scroll alebo rotačným kompresorom. Ideálna pre aplikácie s nízkou hlučnosťou a pre mestské centrá.
- Zníženie hlučnosti (vnútorná inštalácia)
- Žiadne znečistenie priestoru (zameranie na mestské centrá)
Vybavený továrensky montovaným vodou/glykolom chladeným kondenzátorom PHE, pre kratšie inštalácie a výhody spätného získavania tepla.
Špecifikácie
Pozri všetky
| Séria iCOOL WCU - LT | |||
|---|---|---|---|
| 3.0 kW | |||
| Model | WCU-KRC035L08 | ||
| Compressors | Jeden kompresor | ||
| Compatible refrigerants | R448A, R449A | ||
| PED | CAT | I | |
| Application and nominal cooling capacity | MT/LT (kW) | LT (3,0) | |
| LT (R449A/R448A) - Cooling capacity at | . | ||
| ET -35°C, WT 15°C, CT 30°C (Min - Max) | kW | 0,4 - 3,3 | |
| ET -35°C, WT 30°C, CT 40°C (Min - Max) | kW | 0,3 - 2,6 | |
| ET -35°C, WT 40°C, CT 50°C (Min - Max) | kW | — - — | |
| ET -30°C, WT 15°C, CT 30°C (Min - Max) | kW | 0,5 - 4,0 | |
| ET -30°C, WT 30°C, CT 40°C (Min - Max) | kW | 0,4 - 3,3 | |
| ET -30°C, WT 40°C, CT 50°C (Min - Max) | kW | 0,3 - 2,8 | |
| ET -25°C, WT 15°C, CT 30°C (Min - Max) | kW | 0,7 - 4,9 | |
| ET -25°C, WT 30°C, CT 40°C (Min - Max) | kW | 0,5 - 4,1 | |
| ET -25°C, WT 40°C, CT 50°C (Min - Max) | kW | 0,4 - 3,5 | |
| Nominal operating current at ET -10°C MT / -30°C LT AT 32°C and 400V 50Hz | A | 6,1 | |
| Maximum operating current (in the most loaded phase at 400V 50Hz) | A | 8,4 | |
| Maximum power consumption | kW | 3,9 | |
| Dimension (Width) | mm | 1.000 | |
| Dimension (Height) | mm | 705 | |
| Dimension (Depth) | mm | 530 | |
| Net weight | kg | 92 | |
| Sound level at 10m | dB(A) | 42,0 | |
| Oil charge | dm³ | 0,7 + 0,4 | |
| Connections (Suction) | Inch (mm) | 7/8 | |
| Connections (Liquid) | Inch (mm) | 3/8 | |
| Liquid receiver | dm³ | 3,9 | |
| Length of connection piping | m | 40 | |
| Maximum height distance (Evaporator above) | m | 12 | |
| Maximum height distance (Evaporator below) | m | 12 | |
| Which pipes needs to be insulated (Suction / liquid / both) | Suction | ||
| Recommended insulation thickness | mm | 19 | |
| Maximum quantity of evaporators connected | Qty. | 5 | |
| Evaporation temperature (Min) | °C | -35 | |
| Evaporation temperature (Max) | °C | -15 | |
| Ambient temperature (Min) | °C | -20 | |
| Ambient temperature (Max) | °C | 43 | |
| Plate heat exchanger connections (Inlet) | Inch | 1/2 | |
| Plate heat exchanger connections (Outlet) | Inch | 3/4 | |
| Compressor - additional data | . | ||
| Compressor model | C-7RZ320L4ABL | ||
| Volumetric flow | m³/h | 1,7 - 10,4 | |
| Rotation range | rps | 15 - 90 | |
| Current (Full load amperage) | A | 6,4 | |
| Current (Peak current limit / Locked rotor amperage) | A | 15 / — | |
| Oil type | FV68S (PVE) | ||
| Crankcase heater power consumption | W | 35 | |
| CU power supply | . | ||
| Voltage | V / ph / Hz | 3x400 / 50 PE+N (TN-S) | |
| Recommended minimum cable cross-section | mm² | 5x2,5 | |
| Recommended minimum protection | C16 | ||
* ET: Teplota odparovania. WT: vstupná teplota vody (alebo glykolu). CT: teplota kondenzácie.