Séria iCOOL WCU - LT
Previous capacity
Next capacity
8.7kW
WCU-KSC090L08
Séria iCOOL WCU pre aplikácie LT
Variant iCOOL na splnenie náročných požiadaviek na prostredie inštalácie.
Vysoko výkonná invertorová kondenzačná jednotka chladená vodou/glykolom pre komerčné inštalácie. Určená pre aplikácie LT. Vybavená hermetickým scroll alebo rotačným kompresorom. Ideálna pre aplikácie s nízkou hlučnosťou a pre mestské centrá.
- Zníženie hlučnosti (vnútorná inštalácia)
- Žiadne znečistenie priestoru (zameranie na mestské centrá)
Vybavený továrensky montovaným vodou/glykolom chladeným kondenzátorom PHE, pre kratšie inštalácie a výhody spätného získavania tepla.
Špecifikácie
Pozri všetky
| Séria iCOOL WCU - LT | |||
|---|---|---|---|
| 8.7 kW | |||
| Model | WCU-KSC090L08 | ||
| Compressors | Jeden kompresor | ||
| Compatible refrigerants | R448A, R449A | ||
| PED | CAT | II | |
| Application and nominal cooling capacity | MT/LT (kW) | LT (8,7) | |
| LT (R449A/R448A) - Cooling capacity at | . | ||
| ET -35°C, WT 15°C, CT 30°C (Min - Max) | kW | 2,6 - 8,2 | |
| ET -35°C, WT 30°C, CT 40°C (Min - Max) | kW | 2,0 - 7,3 | |
| ET -35°C, WT 40°C, CT 50°C (Min - Max) | kW | — - — | |
| ET -30°C, WT 15°C, CT 30°C (Min - Max) | kW | 3,3 - 10,1 | |
| ET -30°C, WT 30°C, CT 40°C (Min - Max) | kW | 2,6 - 9,1 | |
| ET -30°C, WT 40°C, CT 50°C (Min - Max) | kW | 2,0 - 8,3 | |
| ET -25°C, WT 15°C, CT 30°C (Min - Max) | kW | 4,2 - 12,6 | |
| ET -25°C, WT 30°C, CT 40°C (Min - Max) | kW | 3,3 - 11,4 | |
| ET -25°C, WT 40°C, CT 50°C (Min - Max) | kW | 2,6 - 10,3 | |
| Nominal operating current at ET -10°C MT / -30°C LT AT 32°C and 400V 50Hz | A | 18,9 | |
| Maximum operating current (in the most loaded phase at 400V 50Hz) | A | 27,9 | |
| Maximum power consumption | kW | 13,1 | |
| Dimension (Width) | mm | 1.300 | |
| Dimension (Height) | mm | 705 | |
| Dimension (Depth) | mm | 530 | |
| Net weight | kg | 169 | |
| Sound level at 10m | dB(A) | 55,0 | |
| Oil charge | dm³ | 2,5 + 0,4 | |
| Connections (Suction) | Inch (mm) | 1 1/8 | |
| Connections (Liquid) | Inch (mm) | 5/8 | |
| Liquid receiver | dm³ | 14 | |
| Length of connection piping | m | 40 | |
| Maximum height distance (Evaporator above) | m | 12 | |
| Maximum height distance (Evaporator below) | m | 12 | |
| Which pipes needs to be insulated (Suction / liquid / both) | Suction | ||
| Recommended insulation thickness | mm | 19 | |
| Maximum quantity of evaporators connected | Qty. | 5 | |
| Evaporation temperature (Min) | °C | -35 | |
| Evaporation temperature (Max) | °C | -10 | |
| Ambient temperature (Min) | °C | -20 | |
| Ambient temperature (Max) | °C | 43 | |
| Plate heat exchanger connections (Inlet) | Inch | 1 | |
| Plate heat exchanger connections (Outlet) | Inch | 1 | |
| Compressor - additional data | . | ||
| Compressor model | ACC144NA03 | ||
| Volumetric flow | m³/h | 10,0 - 37,6 | |
| Rotation range | rps | 25 - 72 | |
| Current (Full load amperage) | A | 22,9 | |
| Current (Peak current limit / Locked rotor amperage) | A | 46 / — | |
| Oil type | FV32S (PVE) | ||
| Crankcase heater power consumption | W | 2x90 | |
| CU power supply | . | ||
| Voltage | V / ph / Hz | 3x400 / 50 PE+N (TN-S) | |
| Recommended minimum cable cross-section | mm² | 5x6,0 | |
| Recommended minimum protection | C32 | ||
* ET: Teplota odparovania. WT: vstupná teplota vody (alebo glykolu). CT: teplota kondenzácie.