Séria iCOOL WCU - MT
10.0kW
WCU-KSC100M08
Séria iCOOL WCU pre MT aplikácie
Variant iCOOL na splnenie náročných požiadaviek na prostredie inštalácie.
Vysoko výkonná invertorová kondenzačná jednotka chladená vodou/glykolom pre komerčné inštalácie. Určená pre aplikácie MT. Vybavená hermetickým scroll alebo rotačným kompresorom. Ideálna pre aplikácie s nízkou hlučnosťou a pre mestské centrá.
- Zníženie hlučnosti (vnútorná inštalácia)
- Žiadne znečistenie priestoru (zameranie na mestské centrá)
Vybavený továrensky montovaným vodou/glykolom chladeným kondenzátorom PHE, pre kratšie inštalácie a výhody spätného získavania tepla.
Špecifikácie
Pozri všetky
| Séria iCOOL WCU - MT | |||
|---|---|---|---|
| 10.0 kW | |||
| Model | WCU-KSC100M08 | ||
| Compressors | Jeden kompresor | ||
| Compatible refrigerants | R448A, R449A, R134a, R513A | ||
| PED | CAT | II | |
| Application and nominal cooling capacity | MT/LT (kW) | MT (10,0) | |
| MT (R449A/R448A) - Cooling capacity at | . | ||
| ET -15°C, WT 15°C, CT 30°C (Min - Max) | kW | 3,3 - 11,2 | |
| ET -15°C, WT 30°C, CT 40°C (Min - Max) | kW | 1,9 - 8,8 | |
| ET -15°C, WT 40°C, CT 50°C (Min - Max) | kW | 0,8 - 6,7 | |
| ET -10°C, WT 15°C, CT 30°C (Min - Max) | kW | 4,0 - 13,7 | |
| ET -10°C, WT 30°C, CT 40°C (Min - Max) | kW | 2,8 - 11,1 | |
| ET -10°C, WT 40°C, CT 50°C (Min - Max) | kW | 1,9 - 9,0 | |
| ET -5°C, WT 15°C, CT 30°C (Min - Max) | kW | 4,8 - 16,6 | |
| ET -5°C, WT 30°C, CT 40°C (Min - Max) | kW | 3,8 - 13,9 | |
| ET -5°C, WT 40°C, CT 50°C (Min - Max) | kW | 2,9 - 11,6 | |
| MT (R134a/R513A) - Cooling capacity at | . | ||
| ET -15°C; WT 15°C, CT 30°C (Min - Max) | kW | 2,1 - 5,5 | |
| ET -15°C; WT 30°C, CT 40°C (Min - Max) | kW | 1,8 - 4,9 | |
| ET -15°C; WT 40°C, CT 50°C (Min - Max) | kW | 1,5 - 4,3 | |
| ET -10°C; WT 15°C, CT 30°C (Min - Max) | kW | 2,6 - 6,8 | |
| ET -10°C; WT 30°C, CT 40°C (Min - Max) | kW | 2,2 - 6,1 | |
| ET -10°C; WT 40°C, CT 50°C (Min - Max) | kW | 1,9 - 5,4 | |
| ET -5°C; WT 15°C, CT 30°C (Min - Max) | kW | 3,2 - 8,5 | |
| ET -5°C; WT 30°C, CT 40°C (Min - Max) | kW | 2,7 - 7,6 | |
| ET -5°C; WT 40°C, CT 50°C (Min - Max) | kW | 2,3 - 6,8 | |
| Nominal operating current at ET -10°C MT / -30°C LT AT 32°C and 400V 50Hz | A | 12,1 | |
| Maximum operating current (in the most loaded phase at 400V 50Hz) | A | 17,9 | |
| Maximum power consumption | kW | 8,4 | |
| Dimension (Width) | mm | 1.200 | |
| Dimension (Height) | mm | 775 | |
| Dimension (Depth) | mm | 561 | |
| Net weight | kg | 134 | |
| Sound level at 10m | dB(A) | 54,0 | |
| Oil charge | dm³ | 2,0 + 0,4 | |
| Connections (Suction) | Inch (mm) | 7/8 | |
| Connections (Liquid) | Inch (mm) | 1/2 | |
| Liquid receiver | dm³ | 10,0 | |
| Length of connection piping | m | 40 | |
| Maximum height distance (Evaporator above) | m | 12 | |
| Maximum height distance (Evaporator below) | m | 12 | |
| Which pipes needs to be insulated (Suction / liquid / both) | Suction | ||
| Recommended insulation thickness | mm | 13 | |
| Maximum quantity of evaporators connected | Qty. | 7 | |
| Evaporation temperature (Min) | °C | -15 | |
| Evaporation temperature (Max) | °C | 10 | |
| Ambient temperature (Min) | °C | -20 | |
| Ambient temperature (Max) | °C | 43 | |
| Plate heat exchanger connections (Inlet) | Inch | 1 | |
| Plate heat exchanger connections (Outlet) | Inch | 1/2 | |
| Compressor - additional data | . | ||
| Compressor model | C-SBS180H00B | ||
| Volumetric flow | m³/h | 5,8 - 17,4 | |
| Rotation range | rps | 32 - 90 | |
| Current (Full load amperage) | A | 14,7 | |
| Current (Peak current limit / Locked rotor amperage) | A | 34 / — | |
| Oil type | FV68S (PVE) | ||
| Crankcase heater power consumption | W | 70 | |
| CU power supply | . | ||
| Voltage | V / ph / Hz | 3x400 / 50 PE+N (TN-S) | |
| Recommended minimum cable cross-section | mm² | 5x4,0 | |
| Recommended minimum protection | C25 | ||
* ET: Teplota odparovania. WT: vstupná teplota vody (alebo glykolu). CT: teplota kondenzácie.