Serija iCORE OCU-CR
Prejšnja zmogljivost
Naslednja zmogljivost
4.00kW
OCU-CR200VF5A - OCU-CR200VF5ASL
Serija iCORE OCU-CR CO2
Transkritične kondenzacijske enote CO2. iCORE OCU-CR serije CO2 ponujajo široko paleto hladilnih sistemov, ki izpolnjujejo posebne potrebe različnih komercialnih aplikacij.
- Panasonic je združil dvostopenjski kompresor z deljenim ciklom za večjo učinkovitost
- Visoka sezonska učinkovitost
- Visok COP pri visoki temperaturi okolice
- Izbirna možnost pridobitve subvencije (odvisno od lokacije)
- Enostaven postopek priključitve
- Nastavitvene točke pri srednji ali nizki temperaturi, ki so tako na voljo glede na uporabo
- Kompaktna enota
- Tiho delovanje
- Visok zunanji statični tlak
Tehnični podatki
Poglej vse
| Serija iCORE OCU-CR | |||
|---|---|---|---|
| 4.00 kW | |||
| Model | OCU-CR200VF5A | ||
| Anti corrosion coating model | OCU-CR200VF5ASL | ||
| Compressors | En kompresor | ||
| Refrigerant | R744 | ||
| PED | CAT | Ι | |
| Application and nominal cooling capacity | MT/LT (kW) | MT (4) / LT (2) | |
| Power supply (Voltage) | V | 220 - 230 - 240 | |
| Power supply (Phase) | Enofazni | ||
| Power supply (Frequency) | Hz | 50 | |
| MT - Cooling capacity at | . | ||
| ET -15°C, AT 32°C (Min - Max) | kW | 1,9 - 3,3 | |
| ET -15°C, AT 38°C (Min - Max) | kW | 1,8 - 3,1 | |
| ET -15°C, AT 43°C (Min - Max) | kW | 1,6 - 2,9 | |
| ET -10°C, AT 32°C (Min - Max) | kW | 2,1 - 3,7 | |
| ET -10°C, AT 38°C (Min - Max) | kW | 2,0 - 3,5 | |
| ET -10°C, AT 43°C (Min - Max) | kW | 1,8 - 3,2 | |
| ET -5°C, AT 32°C (Min - Max) | kW | 2,3 - 4,0 | |
| ET -5°C, AT 38°C (Min - Max) | kW | 2,2 - 3,8 | |
| ET -5°C, AT 43°C (Min - Max) | kW | 2,0 - 3,5 | |
| LT - Cooling capacity at | . | ||
| ET -45°C, AT 32°C (Min - Max) | kW | 0,7 - 1,2 | |
| ET -45°C, AT 38°C (Min - Max) | kW | 0,6 - 1,1 | |
| ET -45°C, AT 43°C (Min - Max) | kW | 0,6 - 1,0 | |
| ET -35°C, AT 32°C (Min - Max) | kW | 1,1 - 1,9 | |
| ET -35°C, AT 38°C (Min - Max) | kW | 1,0 - 1,8 | |
| ET -35°C, AT 43°C (Min - Max) | kW | 0,9 - 1,6 | |
| ET -30°C, AT 32°C (Min - Max) | kW | 1,3 - 2,3 | |
| ET -30°C, AT 38°C (Min - Max) | kW | 1,2 - 2,1 | |
| ET -30°C, AT 43°C (Min - Max) | kW | 1,1 - 2,0 | |
| ET -25°C, AT 32°C (Min - Max) | kW | 1,5 - 2,6 | |
| ET -25°C, AT 38°C (Min - Max) | kW | 1,4 - 2,5 | |
| ET -25°C, AT 43°C (Min - Max) | kW | 1,3 - 2,3 | |
| SEPR cooling at ET -10°C AT 32°C | 3,83 | ||
| SEPR freezing at ET -35°C AT 32°C | 1,92 | ||
| Annual electricity consumption at ET -10°C AT 32°C | kWh/a | 6.797 | |
| Annual electricity consumption at ET -35°C AT 32°C | kWh/a | 8.021 | |
| Evaporator connection | Več spletnih strani | ||
| Evaporation temperature (Min) | °C | -45 | |
| Evaporation temperature (Max) | °C | -5 | |
| Ambient temperature (Min) | °C | -20 | |
| Ambient temperature (Max) | °C | +43 | |
| PS line (Suction) | bar | 120 | |
| PS line (Liquid) | bar | 80 | |
| User system external alarm. Digital input. Non-voltage contact | Da | ||
| Liquid tube electromagnetic valve | Vac | 220 - 230 - 240 | |
| Showcase operation ON/OFF signal. Digital input. Non-voltage contact | Da | ||
| Modbus communication line (RS485) | Ports | Da | |
| Type of compressors | 2-stopenjska rotacija | ||
| Dimension (Width) | mm | 900 | |
| Dimension (Height) | mm | 930 | |
| Dimension (Depth) | mm | 437 | |
| Net weight | kg | 70 | |
| Connections (Suction) | Inch (mm) | 3/8 (9,52) (1) | |
| Connections (Liquid) | Inch (mm) | 1/4 (6,35) (1) | |
| Length of connection piping | m | 25 | |
| Air flow | m³/min | 54 | |
| External static pressure | Pa | 17 | |
| Standard performance | . | ||
| Ambient temperature | °C | 32 | |
| Evaporating temperature (MT) | °C | -10 | |
| Evaporating temperature (LT) | °C | -35 | |
| Nominal load ampere (MT) | A | 7,94 | |
| Nominal load ampere (LT) | A | 7,26 | |
| Sound pressure (MT) | dB(A) | 35,5 (3) | |
| Sound pressure (LT) | dB(A) | 35,5 (3) | |
| Drier filter liquid line, Ø6,35mm | D-152T / DCY-P12 | Da (vključeno) | |
| Drier filter liquid line, Ø15,88mm | D-155T / DCY-P8 | - | |
| Suction filter, Ø19,05mm (outer Ø welding) | S-008T / S-008T1 | - | |
(1) Ti premeri ustrezajo izhodu enote. Zahtevani premer je treba izračunati s projektantom hlajenja, ki je na voljo proti PRO Clubu.
(2) PZ-68S (hladilno olje) je treba dodati v skladu z oblikovalcem programa Hladilnik, ki je na voljo v PRO Clubu.
(3) ET -10 °C, 65 S-1, 10 m od izdelka.
(4) ET -10 °C, 80 S-1, 10 m od izdelka.