Serija iCOOL SE – LT
2.90kW
OCU-KRE030L05
Serija iCOOL SE. Enostavna inženirska rešitev za aplikacije LT
Od 1,2 do 3,0 kW.
Enostavna namestitev s poenostavljenim postopkom zagona. Inverterska tehnologija še nikoli ni bila tako enostavna.
Prihranite čas in stroške obratovanja z našimi energetsko učinkovitimimi enotami, ki temeljijo na inverterskih kompresorjih.
- Podobni stane naložbe v znatni prihranki energije v primerjavi s tehnologijo vklop-izklop
- Popolna inverterska tehnologija BLDC
- Krmilnik PLC za krmilnik Namenski
- Delovanje z nizko stopnjo hrupa
- Primerno za uporabo z več uparjalniki (modeli MT)
- Konceptno vozilo v zadevi izdelan v Evropi
Tehnični podatki
Poglej vse
| Serija iCOOL SE – LT | |||
|---|---|---|---|
| 2.90 kW | |||
| Model | OCU-KRE030L05 | ||
| Compressors | En kompresor | ||
| Compatible refrigerants | R448A, R449A | ||
| PED | CAT | I | |
| Application and nominal cooling capacity | MT/LT (kW) | LT (2,9) | |
| LT (R449A/R448A) - Cooling capacity at | . | ||
| ET -35°C, AT 32°C (Min - Max) | kW | 0,8 - 2,4 | |
| ET -35°C, AT 38°C (Min - Max) | kW | 0,7 - 2,2 | |
| ET -35°C, AT 43°C (Min - Max) | kW | 0,7 - 2,0 | |
| ET -30°C, AT 32°C (Min - Max) | kW | 1,0 - 2,9 | |
| ET -30°C, AT 38°C (Min - Max) | kW | 0,9 - 2,7 | |
| ET -30°C, AT 43°C (Min - Max) | kW | 0,9 - 2,4 | |
| ET -25°C, AT 32°C (Min - Max) | kW | 1,3 - 3,6 | |
| ET -25°C, AT 38°C (Min - Max) | kW | 1,2 - 3,3 | |
| ET -25°C, AT 43°C (Min - Max) | kW | 1,1 - 3,0 | |
| SEPR freezing at ET -35°C AT 32°C (R448A) | 2,14 | ||
| Annual electricity consumption at ET -35°C AT 32°C (R448A) | kWh/a | 8.475 | |
| COP at ET -35°C, AT 32°C (R448A) | — | ||
| Nominal operating current at ET -10°C MT / -30°C LT AT 32°C and 230 - 400V 50Hz | A | 12,4 | |
| Maximum operating current (in the most loaded phase at 230 - 400V 50Hz) | A | 17 | |
| Maximum power consumption | kW | 3,6 | |
| Dimension (Width) | mm | 1.000 | |
| Dimension (Height) | mm | 605 | |
| Dimension (Depth) | mm | 450 | |
| Net weight | kg | 80 | |
| Sound level at 10m | dB(A) | 42,5 | |
| Connections (Suction) | Inch (mm) | 3/4 | |
| Connections (Liquid) | Inch (mm) | 3/8 | |
| Liquid receiver | dm³ | 3,9 | |
| Length of connection piping | m | 20 | |
| Maximum height distance (Evaporator above) | m | 7 | |
| Maximum height distance (Evaporator below) | m | 7 | |
| Which pipes needs to be insulated (Suction / liquid / both) | Suction | ||
| Recommended insulation thickness | mm | 19 | |
| Maximum quantity of evaporators connected | Qty. | 3 | |
| Evaporation temperature (Min) | °C | -35 | |
| Evaporation temperature (Max) | °C | -15 | |
| Ambient temperature (Min) | °C | -20 | |
| Ambient temperature (Max) | °C | 43 | |
| Condenser | . | ||
| Fans x diameter | mm | 1x450 | |
| Air flow (Nominal) | m³/h | 3.600 | |
| Fan power supply | V / ph / Hz | 220 - 240 / 1 / 50 | |
| Fan power consumption | W | 170 | |
| Nominal fan amperage | A | 1,4 | |
| Compressor - additional data | . | ||
| Compressor model | C-7RVN153L0B | ||
| Volumetric flow | m³/h | 1,7 - 10,4 | |
| Rotation range | rps | 30 - 90 | |
| Current (Full load amperage) | A | 9,6 | |
| Current (Peak current limit / Locked rotor amperage) | A | 25 / — | |
| Oil type | FV68S | ||
| Oil compressor charge | dm³ | 0,7 | |
| Crankcase heater power consumption | W | 35 | |
| CU power supply | . | ||
| Voltage | V / ph / Hz | 220 - 240 / 1 / 50 | |
| Recommended minimum cable cross-section | mm² | 3x2,5 | |
| Recommended minimum protection | C20 | ||