BMS interface with P‑Link


New BMS interface with Panasonic communication bus helps you to get significant savings.

In addition to reducing the time of configuration and installation, the potential mistakes can be avoided.

Easy to use and reliable interfaces for a straightforward integration.


1

Direct connection to P-Communication bus

· No need additional gateway (CZ-CFUNC2)
· Significant 50% of cost saving for BMS interface*
· Reduce time of configuration and avoid potential mistakes

* In the case of PAW-AC2-BAC-16P by Panasonic calculation.

2

Upgraded specifications and easy configuration

· Base PCB board with MCU, Ethernet, RS485, RS232 & USB
· Configuration by IP or USB
· New single configuration tool for all models (IntesisBox MAPS)
· Modular expansion PCBs (KNX, RS485, DALI, MBUS, LON, ANYBUS)

3

BTL certified for BACnet

· BACnet: Version 14 and BTL certified

Direct connection to P-Communication bus

New interface can provide faster, cheaper, easier solution in your projects!
NEW Interface with P-communication bus.

A. New interface
B. U1, U2

· U1U2 link is connected directly to IntesisBox
· Support from 16 to 128 per each box

Key upgrade

· Base PCB board with MCU, Ethernet, RS485, RS232 and USB
· Modular expansion PCBs (KNX, RS485, DALI, MBUS, LON, ANYBUS)
· Frontal PCB with all Leds buttons and USB console Port
· New single configuration tool for all models (IntesisBox MAPS)
· Recovery of current configuration project working
· USB port will allow to store logs without PC
· Configuration by IP or USB (old generation RS232)

A. Low powered: 24VDC
B. Status indication leds
C. Multifunctional buttons
D. USB console port
E. USB storage port
F. Multifunctional communication ports
G. Ethernet port

Model for BACnet
  • PAW-AC2-BAC-16P: Maximum 16 indoor units connected
  • PAW-AC2-BAC-64P: Maximum 64 indoor units connected
  • PAW-AC2-BAC-128P: Maximum 128 indoor units connected
Model for Modbus
  • PAW-AC2-MBS-16P: Maximum 16 indoor units connected
  • PAW-AC2-MBS-64P: Maximum 64 indoor units connected
  • PAW-AC2-MBS-128P: Maximum 128 indoor units connected
Model for KNX
  • PAW-AC2-KNX-16P: Maximum 16 indoor units connected
  • PAW-AC2-KNX-64P: Maximum 64 indoor units connected



Version
  • 16: 1-16 Connectable indoor units / 1-16 Connectable outdoor units / 1 P- Communication bus Port
  • 64: 1-64 Connectable indoor units / 1-30 Connectable outdoor units / 1 P- Communication bus Port
  • 128: 128 (1-64/P- Communication bus Port) Connectable indoor units / 60 (1-30/P- Communication bus Port) Connectable outdoor units / 2 P- Communication bus Port