Řada iCOOL SE - LT
Předchozí výkon
Další výkon
1.20kW
OCU-KRE012L05
Řada iCOOL SE. Jednoduché technické řešení pro LT aplikace
od 1,2 do 3,0 kW.
instalace zjednodušeného procesu uvedení do provozu. Technologie, která se chová takhle.
Ušetřete čas a provozní náklady s našimi energeticky úspornými jednotkami založenými na invertorovém kompresorechech.
- Podobné investiční náklady a výrazné úspory energie oproti technologii zapnuto.
- Plně invertorová technologie BLDC
- Speciální řídicí jednotka PLC
- Provoz s nízkou hlučností
- Vhodné pro aplikace s více výparníky (modely MT)
- Navrženo a vyrobeno v Evropě
Technické údaje
Zobrazit vše
| Řada iCOOL SE - LT | |||
|---|---|---|---|
| 1.20 kW | |||
| Model | OCU-KRE012L05 | ||
| Compressors | Jeden kompresor | ||
| Compatible refrigerants | R448A, R449A | ||
| PED | CAT | I | |
| Application and nominal cooling capacity | MT/LT (kW) | LT (1,2) | |
| LT (R449A/R448A) - Cooling capacity at | . | ||
| ET -35°C, AT 32°C (Min - Max) | kW | 0,3 - 1,0 | |
| ET -35°C, AT 38°C (Min - Max) | kW | 0,3 - 0,9 | |
| ET -35°C, AT 43°C (Min - Max) | kW | 0,2–0,8 | |
| ET -30°C, AT 32°C (Min - Max) | kW | 0,4 - 1,2 | |
| ET -30°C, AT 38°C (Min - Max) | kW | 0,3 - 1,1 | |
| ET -30°C, AT 43°C (Min - Max) | kW | 0,3 - 1,0 | |
| ET -25°C, AT 32°C (Min - Max) | kW | 0,5–1,5 | |
| ET -25°C, AT 38°C (Min - Max) | kW | 0,4 - 1,4 | |
| ET -25°C, AT 43°C (Min - Max) | kW | 0,4 - 1,3 | |
| SEPR freezing at ET -35°C AT 32°C (R448A) | — | ||
| Annual electricity consumption at ET -35°C AT 32°C (R448A) | kWh/a | — | |
| COP at ET -35°C, AT 32°C (R448A) | 0,95 | ||
| Nominal operating current at ET -10°C MT / -30°C LT AT 32°C and 230 - 400V 50Hz | A | 5,5 | |
| Maximum operating current (in the most loaded phase at 230 - 400V 50Hz) | A | 7,2 | |
| Maximum power consumption | kW | 1,4 | |
| Dimension (Width) | mm | 1 000 | |
| Dimension (Height) | mm | 605 | |
| Dimension (Depth) | mm | 450 | |
| Net weight | kg | 70 | |
| Sound level at 10m | dB(A) | 42,5 | |
| Connections (Suction) | Inch (mm) | 1/2 | |
| Connections (Liquid) | Inch (mm) | 3/8 | |
| Liquid receiver | dm³ | 3,9 | |
| Length of connection piping | m | 20 | |
| Maximum height distance (Evaporator above) | m | 7 | |
| Maximum height distance (Evaporator below) | m | 7 | |
| Which pipes needs to be insulated (Suction / liquid / both) | Sání | ||
| Recommended insulation thickness | mm | 19 | |
| Maximum quantity of evaporators connected | Qty. | 3 | |
| Evaporation temperature (Min) | °C | -35 | |
| Evaporation temperature (Max) | °C | -15 | |
| Ambient temperature (Min) | °C | -20 | |
| Ambient temperature (Max) | °C | 43 | |
| Condenser | . | ||
| Fans x diameter | mm | 1 x 450 | |
| Air flow (Nominal) | m³/h | 3 600 | |
| Fan power supply | V / ph / Hz | 220 - 240 / 1 / 50 | |
| Fan power consumption | W | 170 | |
| Nominal fan amperage | A | 1,4 | |
| Compressor - additional data | . | ||
| Compressor model | C-6RVN63L0B | ||
| Volumetric flow | m³/h | 0,6–4,1 | |
| Rotation range | rps | 30–90 | |
| Current (Full load amperage) | A | 3,6 | |
| Current (Peak current limit / Locked rotor amperage) | A | 15 / — | |
| Oil type | FV68S | ||
| Oil compressor charge | dm³ | 0,6 | |
| Crankcase heater power consumption | W | 35 | |
| CU power supply | . | ||
| Voltage | V / ph / Hz | 220 - 240 / 1 / 50 | |
| Recommended minimum cable cross-section | mm² | 3x2,5 | |
| Recommended minimum protection | C16 | ||