Heatcharge VZ Inverter+ • R32

Предходна мощност Следваща мощност

2.5kW

KIT-VZ9-SKE (CS-VZ9SKE + CU-VZ9SKE)

Heatcharge. Energy Charge System.

Energy class A+++ and offers maximum comfort and energy savings. This powerful air heat pump is designed for commercial and residential climate that places extremely high demands on the heating system.

Хармония от природата на закрито

Открийте последното поколение в системата за климатизация

Управлявайте решенията си на Panasonic по всяко време и навсякъде

Спецификации

Вижте всички
Heatcharge VZ Inverter+ • R32
2.5 kW
Cooling capacity (Min) kW 0,60
Input power heating (Min) kW 0,14
Heating capacity (Max) kW 7,80
Heating capacity (Min) kW 0,60
Input power cooling (Max) kW 0,61
Input power cooling (Min) kW 0,14
Cooling capacity (Max) kW 3,00
Input power heating (Max) kW 2,72
Operating range (Heat - Max) °C +24
Operating range (Heat - Min) °C -30
Operating range (Cool - Max) °C +43
Elevation difference (in/out) (6) m 12
Outdoor dimension (Depth) (5) mm 299
Outdoor dimension (Width) (5) mm 799
Outdoor dimension (Height) (5) mm 630
Outdoor sound pressure (Heat -Hi) (4) dB(A) 49
Outdoor unit CU-VZ9SKE
Outdoor air flow (Heat) m³/min 33,1
Outdoor air flow (Cool) m³/min 33,1
Indoor unit CS-VZ9SKE
Indoor sound pressure (Heat -Q-Lo) (4) dB(A) 18
Indoor sound pressure (Heat -Lo) (4) dB(A) 26
Indoor sound pressure (Heat -Hi) (4) dB(A) 44
Indoor sound pressure (Cool -Q-Lo) (4) dB(A) 18
Indoor sound pressure (Cool -Lo) (4) dB(A) 27
Indoor air flow (Heat) m³/min 15,5
Indoor air flow (Cool) m³/min 12,5
Indoor connection indoor / outdoor mm² 4 x 1,5
Indoor sound pressure (Cool -Hi) (4) dB(A) 44
SCOP (2) 6,20 A+++
Annual energy consumption heating (3) kWh/a 812
Annual energy consumption cooling (3) kWh/a 83,00
Input power cooling (Nominal) kW 0,43
Pdesign (cooling) kW 2,50
SEER (2) 10,50 A+++
Outdoor net weight kg 39,5
Outdoor sound pressure (Cool -Hi) (4) dB(A) 49
Indoor net weight kg 14,5
Indoor dimension (Height) mm 295
Pdesign at -10°C kW 3,60
Indoor power source V 230
Pipe length range m 3 ~ 15
Refrigerant (R32) / CO2 Eq. kg / T 1,05 / 0,70875
Kit KIT-VZ9-SKE
Additional gas amount g/m 20
Pipe length for additional gas m 7,5
Pipe diameter (Gas) Inch (mm) 3/8 (9,52)
Pipe diameter (Liquid) Inch (mm) 1/4 (6,35)
Indoor dimension (Depth) mm 375
Indoor dimension (Width) mm 798
Indoor recommended fuse A 16
Lowest outdoor temperature tested by 3rd party laboratory (7) °C -35
Heating capacity at -7°C kW 5,00
COP (Nominal) (1) W/W 5,63
Heating capacity (Nominal) kW 3,60
Cooling capacity (Nominal) kW 2,50
Operating range (Cool - Min) °C -10
Input power heating (Nominal) kW 0,64

(1) Energy Label Scale from A+++ to D.

(2) EER and COP calculation is based in accordance to EN14511.

(3) The annual energy consumption is calculated in accordance to EU/626/2011.

(4) The sound pressure of the indoor unit shows the value measured of a position 1 m in front of the main body and 0,8 m below the unit. For outdoor unit 1 m in front and 1 m in rear side of main body. The sound pressure is measured in accordance with JIS C 9612. Q-Lo: Quiet mode. Lo: The lowest set fan speed.

(5) Add 70 mm for piping port.

(6) When installing the outdoor unit at a higher position than the indoor unit.

(7) Tested by 3rd party laboratory, SP, according to EN14511:2013 and SP Method 1721, this temperature is not guaranteed by Factory.

Допълнителни продукти