iCOOL SE-serien - LT
2.20kW
OCU-KRE022L05
iCOOL SE-serien. Enkel teknisk lösning för LT-applikationer
Från 1,2 till 3,0 kW.
Enkel att installera, med en förenklad driftsättningsprocess. Invertertekniken har aldrig varit så enkel.
Spara tid och driftskostnader med våra energieffektiva enheter som bygger på inverterkompressorer.
- Liknande investeringskostnad och betydande energibesparingar jämfört med on-off-teknik
- Fullständig BLDC-inverterteknik
- Dedikerad PLC-kontroller
- Drift med låg ljudnivå
- Lämplig för applikationer med flera förångare (MT-modeller)
- Designad och tillverkad i Europa
Specifikationer
Visa alla
| iCOOL SE-serien - LT | |||
|---|---|---|---|
| 2.20 kW | |||
| Model | OCU-KRE022L05 | ||
| Compressors | En kompressor | ||
| Compatible refrigerants | R448A, R449A | ||
| PED | CAT | I | |
| Application and nominal cooling capacity | MT/LT (kW) | LT (2,2) | |
| LT (R449A/R448A) - Cooling capacity at | . | ||
| ET -35°C, AT 32°C (Min - Max) | kW | 0,6 - 1,8 | |
| ET -35°C, AT 38°C (Min - Max) | kW | 0,5 - 1,6 | |
| ET -35°C, AT 43°C (Min - Max) | kW | 0,5 - 1,5 | |
| ET -30°C, AT 32°C (Min - Max) | kW | 0,7 - 2,2 | |
| ET -30°C, AT 38°C (Min - Max) | kW | 0,7 - 2,0 | |
| ET -30°C, AT 43°C (Min - Max) | kW | 0,6 - 1,9 | |
| ET -25°C, AT 32°C (Min - Max) | kW | 0,9 - 2,8 | |
| ET -25°C, AT 38°C (Min - Max) | kW | 0,8 - 2,5 | |
| ET -25°C, AT 43°C (Min - Max) | kW | 0,8 - 2,3 | |
| SEPR freezing at ET -35°C AT 32°C (R448A) | — | ||
| Annual electricity consumption at ET -35°C AT 32°C (R448A) | kWh/a | — | |
| COP at ET -35°C, AT 32°C (R448A) | 0,98 | ||
| Nominal operating current at ET -10°C MT / -30°C LT AT 32°C and 230 - 400V 50Hz | A | 9,5 | |
| Maximum operating current (in the most loaded phase at 230 - 400V 50Hz) | A | 12,7 | |
| Maximum power consumption | kW | 2,6 | |
| Dimension (Width) | mm | 1.000 | |
| Dimension (Height) | mm | 605 | |
| Dimension (Depth) | mm | 450 | |
| Net weight | kg | 70 | |
| Sound level at 10m | dB(A) | 42,5 | |
| Connections (Suction) | Inch (mm) | 5/8 | |
| Connections (Liquid) | Inch (mm) | 3/8 | |
| Liquid receiver | dm³ | 3,9 | |
| Length of connection piping | m | 20 | |
| Maximum height distance (Evaporator above) | m | 7 | |
| Maximum height distance (Evaporator below) | m | 7 | |
| Which pipes needs to be insulated (Suction / liquid / both) | Suction | ||
| Recommended insulation thickness | mm | 19 | |
| Maximum quantity of evaporators connected | Qty. | 3 | |
| Evaporation temperature (Min) | °C | -35 | |
| Evaporation temperature (Max) | °C | -15 | |
| Ambient temperature (Min) | °C | -20 | |
| Ambient temperature (Max) | °C | 43 | |
| Condenser | . | ||
| Fans x diameter | mm | 1x450 | |
| Air flow (Nominal) | m³/h | 3.600 | |
| Fan power supply | V / ph / Hz | 220 - 240 / 1 / 50 | |
| Fan power consumption | W | 170 | |
| Nominal fan amperage | A | 1,4 | |
| Compressor - additional data | . | ||
| Compressor model | C-7RVN113L0B | ||
| Volumetric flow | m³/h | 1,25 - 7,5 | |
| Rotation range | rps | 30 - 90 | |
| Current (Full load amperage) | A | 7,1 | |
| Current (Peak current limit / Locked rotor amperage) | A | 25 / — | |
| Oil type | FV68S | ||
| Oil compressor charge | dm³ | 0,7 | |
| Crankcase heater power consumption | W | 35 | |
| CU power supply | . | ||
| Voltage | V / ph / Hz | 220 - 240 / 1 / 50 | |
| Recommended minimum cable cross-section | mm² | 3x2,5 | |
| Recommended minimum protection | C20 | ||