iCOOL SCU-serien - MT
Tidigare kapacitet
Nästa kapacitet
19.00kW
SCU-KSC190M08
iCOOL SCU-serien för MT-applikationer
Modeller med högtrycksfläkt för inomhusmontage.
En Plug & Play-lösning för HFO/HFC som är särskilt utformad för inomhusinstallationer.
Den här kompakta enheten bidrar till att minimera installationstiden och minska de totala kostnaderna jämfört med centrala system med fjärrkondensorer.
Specifikationer
Visa alla
| iCOOL SCU-serien - MT | |||
|---|---|---|---|
| 19.00 kW | |||
| Model | SCU-KSC190M08 | ||
| Compressors | Tandemkompressor | ||
| Compatible refrigerants | R448A, R449A, R134a, R513A | ||
| PED | CAT | II | |
| Application and nominal cooling capacity | MT/LT (kW) | MT (19,0) | |
| MT (R449A/R448A) - Cooling capacity at | . | ||
| ET -15°C, AT 32°C (Min - Max) | kW | 2,3 - 15,2 | |
| ET -15°C, AT 38°C (Min - Max) | kW | 2,1 - 13,5 | |
| ET -15°C, AT 43°C (Min - Max) | kW | — - — | |
| ET -10°C, AT 32°C (Min - Max) | kW | 2,9 - 18,7 | |
| ET -10°C, AT 38°C (Min - Max) | kW | 2,6 - 16,7 | |
| ET -10°C, AT 43°C (Min - Max) | kW | 2,4 - 15,2 | |
| ET -5°C, AT 32°C (Min - Max) | kW | 3,6 - 22,7 | |
| ET -5°C, AT 38°C (Min - Max) | kW | 3,2 - 20,5 | |
| ET -5°C, AT 43°C (Min - Max) | kW | 3,0 - 18,8 | |
| MT (R134a/R513A) - Cooling capacity at | . | ||
| ET -15°C; AT 32°C (Min - Max) | kW | 1,7 - 10,7 | |
| ET -15°C; AT 38°C (Min - Max) | kW | — - — | |
| ET -15°C; AT 43°C (Min - Max) | kW | — - — | |
| ET -10°C; AT 32°C (Min - Max) | kW | 2,2 - 13,1 | |
| ET -10°C; AT 38°C (Min - Max) | kW | 2,0 - 11,9 | |
| ET -10°C; AT 43°C (Min - Max) | kW | 1,9 - 11,5 | |
| ET -5°C; AT 32°C (Min - Max) | kW | 2,8 - 15,6 | |
| ET -5°C; AT 38°C (Min - Max) | kW | 2,6 - 14,6 | |
| ET -5°C; AT 43°C (Min - Max) | kW | 2,4 - 14,5 | |
| SEPR cooling at ET -10°C AT 32°C | 3,19 | ||
| SEPR freezing at ET -35°C AT 32°C | - | ||
| Annual electricity consumption at ET -10°C AT 32°C | kWh/a | 35.312 | |
| Annual electricity consumption at ET -35°C AT 32°C | kWh/a | - | |
| Nominal operating current at ET -10°C MT / -30°C LT AT 32°C and 230 - 400V 50Hz | A | 28,7 | |
| Maximum operating current (in the most loaded phase at 230 - 400V 50Hz) | A | 34,9 | |
| Maximum power consumption | kW | 17,7 | |
| Dimension (Width) | mm | 1.327 | |
| Dimension (Height) | mm | 1.558 | |
| Dimension (Depth) | mm | 745 | |
| Net weight | kg | 344 | |
| Sound level at 10m | dB(A) | 55,0 | |
| Oil charge | dm³ | 2,0 + 1,7 + 2x0,4 | |
| Connections (Suction) | Inch (mm) | 1 1/8 | |
| Connections (Liquid) | Inch (mm) | 5/8 | |
| Liquid receiver | dm³ | 15 | |
| Length of connection piping | m | 50 | |
| Maximum height distance (Evaporator above) | m | 12 | |
| Maximum height distance (Evaporator below) | m | 12 | |
| Which pipes needs to be insulated (Suction / liquid / both) | Suction | ||
| Recommended insulation thickness | mm | 13 | |
| Maximum quantity of evaporators connected | Qty. | 10 | |
| Evaporation temperature (Min) | °C | -15 | |
| Evaporation temperature (Max) | °C | 10 | |
| Ambient temperature (Min) | °C | -20 | |
| Ambient temperature (Max) | °C | 43 | |
| Condenser | . | ||
| Fans x diameter | mm | 1x560 | |
| Air flow (Nominal) | m³/h | 9.000 | |
| Fan static pressure | Pa | 80 | |
| Fan power supply | V / ph / Hz | 200 - 277 / 1 / 50 | |
| Fan power consumption | W | 1.050 | |
| Nominal fan amperage | A | 4,6 | |
| Compressor - additional data | . | ||
| Compressor model | C-SBS180H00B/ C-SBN453H8G | ||
| Volumetric flow | m³/h | 5,8 - 17,4 / 14,7 | |
| Rotation range | rps | 32 - 90 | |
| Current (Full load amperage) | A | 15,2 / 11,9 | |
| Current (Peak current limit / Locked rotor amperage) | A | 34 / 66 | |
| Oil type | FV68S (PVE) | ||
| Crankcase heater power consumption | W | 2x70 | |
| CU power supply | . | ||
| Voltage | V / ph / Hz | 3x400 / 50 PE+N (TN-S) | |
| Recommended minimum cable cross-section | mm² | 5x10,0 | |
| Recommended minimum protection | C40 | ||