iCOOL WCU-serien - MT
Tidigare kapacitet
Nästa kapacitet
5.1kW
WCU-KRC045M08
iCOOL WCU-serien för MT-applikationer
Variationen av iCOOL för att uppfylla krävande krav på installationsmiljöer.
Högpresterande vatten/glykolkyld kondensor med inverter för kommersiella installationer. Utformad för MT-applikationer. Utrustad med hermetisk scroll- eller rotationskompressor. Perfekt för applikationer med låg ljudnivå och i stadskärnor.
- Bullerreducering (inomhusinstallation)
- Inga utrymmesföroreningar (fokus på stadskärnor)
Utrustad med fabriksmonterad vatten/glykolkyld PHE-kondensor, för kortare installationer och värmeåtervinning.
Specifikationer
Visa alla
| iCOOL WCU-serien - MT | |||
|---|---|---|---|
| 5.1 kW | |||
| Model | WCU-KRC045M08 | ||
| Compressors | En kompressor | ||
| Compatible refrigerants | R448A, R449A, R134a, R513A | ||
| PED | CAT | I | |
| Application and nominal cooling capacity | MT/LT (kW) | MT (5,1) | |
| MT (R449A/R448A) - Cooling capacity at | . | ||
| ET -15°C, WT 15°C, CT 30°C (Min - Max) | kW | 0,7 - 5,2 | |
| ET -15°C, WT 30°C, CT 40°C (Min - Max) | kW | 0,6 - 4,5 | |
| ET -15°C, WT 40°C, CT 50°C (Min - Max) | kW | 0,5 - 3,9 | |
| ET -10°C, WT 15°C, CT 30°C (Min - Max) | kW | 0,9 - 6,3 | |
| ET -10°C, WT 30°C, CT 40°C (Min - Max) | kW | 0,7 - 5,4 | |
| ET -10°C, WT 40°C, CT 50°C (Min - Max) | kW | 0,6 - 4,7 | |
| ET -5°C, WT 15°C, CT 30°C (Min - Max) | kW | 1,0 - 7,4 | |
| ET -5°C, WT 30°C, CT 40°C (Min - Max) | kW | 0,9 - 6,5 | |
| ET -5°C, WT 40°C, CT 50°C (Min - Max) | kW | 0,7 - 5,7 | |
| MT (R134a/R513A) - Cooling capacity at | . | ||
| ET -15°C; WT 15°C, CT 30°C (Min - Max) | kW | 0,4 - 2,6 | |
| ET -15°C; WT 30°C, CT 40°C (Min - Max) | kW | 0,4 - 2,4 | |
| ET -15°C; WT 40°C, CT 50°C (Min - Max) | kW | 0,3 - 2,1 | |
| ET -10°C; WT 15°C, CT 30°C (Min - Max) | kW | 0,5 - 3,2 | |
| ET -10°C; WT 30°C, CT 40°C (Min - Max) | kW | 0,5 - 3,0 | |
| ET -10°C; WT 40°C, CT 50°C (Min - Max) | kW | 0,4 - 2,6 | |
| ET -5°C; WT 15°C, CT 30°C (Min - Max) | kW | 0,6 - 4,0 | |
| ET -5°C; WT 30°C, CT 40°C (Min - Max) | kW | 0,6 - 3,6 | |
| ET -5°C; WT 40°C, CT 50°C (Min - Max) | kW | 0,5 - 3,2 | |
| Nominal operating current at ET -10°C MT / -30°C LT AT 32°C and 400V 50Hz | A | 4,9 | |
| Maximum operating current (in the most loaded phase at 400V 50Hz) | A | 7,5 | |
| Maximum power consumption | kW | 3,5 | |
| Dimension (Width) | mm | 1.000 | |
| Dimension (Height) | mm | 705 | |
| Dimension (Depth) | mm | 530 | |
| Net weight | kg | 90 | |
| Sound level at 10m | dB(A) | 39,0 | |
| Oil charge | dm³ | 0,7 + 0,4 | |
| Connections (Suction) | Inch (mm) | 5/8 | |
| Connections (Liquid) | Inch (mm) | 3/8 | |
| Liquid receiver | dm³ | 3,9 | |
| Length of connection piping | m | 40 | |
| Maximum height distance (Evaporator above) | m | 12 | |
| Maximum height distance (Evaporator below) | m | 12 | |
| Which pipes needs to be insulated (Suction / liquid / both) | Suction | ||
| Recommended insulation thickness | mm | 13 | |
| Maximum quantity of evaporators connected | Qty. | 5 | |
| Evaporation temperature (Min) | °C | -15 | |
| Evaporation temperature (Max) | °C | 5 | |
| Ambient temperature (Min) | °C | -20 | |
| Ambient temperature (Max) | °C | 43 | |
| Plate heat exchanger connections (Inlet) | Inch | 1/2 | |
| Plate heat exchanger connections (Outlet) | Inch | 3/4 | |
| Compressor - additional data | . | ||
| Compressor model | C-7RVN113L0A | ||
| Volumetric flow | m³/h | 1,25 - 7,5 | |
| Rotation range | rps | 15 - 90 | |
| Current (Full load amperage) | A | 5,8 | |
| Current (Peak current limit / Locked rotor amperage) | A | 11,2 / — | |
| Oil type | FV68S (PVE) | ||
| Crankcase heater power consumption | W | 35 | |
| CU power supply | . | ||
| Voltage | V / ph / Hz | 3x400 / 50 PE+N (TN-S) | |
| Recommended minimum cable cross-section | mm² | 5x2,5 | |
| Recommended minimum protection | C16 | ||
* ET: Förångningstemperatur. WT: Inloppstemperatur för vatten (eller glykol). CT: kondenseringstemperatur.